In this paper, the problem of calculating the stress intensity factor (SIF) for an orthotropic thick-walled cylinder with a small radial crack subject to internal pressure is considered. The crack is assumed to be an edge crack on the external radius of the cylinder. The stress intensity factor is calculated by superposition of an uncracked cylinder with uniform stress distribution and a cylind...

in this paper, the problem of calculating the stress intensity factor (sif) for an orthotropic thick-walled cylinder with a small radial crack subject to internal pressure is considered. the crack is assumed to be an edge crack on the external radius of the cylinder. the stress intensity factor is calculated by superposition of an uncracked cylinder with uniform stress distribution and a cylind...

A thorough examination of the quasi-static penetration of a floating elastic-brittle plate via a fracture mechanics approach has been presented by Bažant and Kim. Bažant and Kim reach the conclusion that there is a size effect (in terms of the plate thickness, h). A few of the assumptions made by these authors will be examined in this discussion. The formulation presented by Bažant and Kim assu...

We seek a non-destructive testing method to detect a radial surface breaking crack in a two-dimensional circular disk. The detection method utilizes steady-state electrical boundary measurements. A nonlinear function which characterizes the size and the location of a radial surface crack is constructed based on the knowledge of two data readings of the boundary voltage intensity corresponding t...

Volume alteration in solid materials is a common cause of material failure. Here we investigate the crack formation in thin elastic layers attached to a substrate. We show that small variations in the volume contraction and substrate restraint can produce widely different crack patterns ranging from spirals to complex hierarchical networks. The networks are formed when there is no prevailing gr...

In this letter, the quantity effect of radial cracks on the cracking propagation behavior as well as the circular crack generation on the impacted glass plate within the sandwiched glass sheets are experimentally investigated via high-speed photography system. Results show that the radial crack velocity on the backing glass layer decreases with the crack number under the same impact conditions ...

The Interaction of a crack with rigid circular cylindrical inclusions is considered for the case of longitudinal shear deformation. General representations of the solutions for a radial crack near a single and midway between two inclusions are given. The particular case of uniform shearing stress applied at infinity is discussed in detail. Expressions for the crack tip stress intensity factor K...

Transient mixed-mode elastodynamic crack growth along arbitrary smoothly varying paths is considered. Asymptotically, the crack tip stress field is square root singular with the angular variation of the singular term depending weakly on the instantaneous values of the crack tip speed and on the mode-I and mode-II stress intensity factors. However, for a material particle at a small distance awa...

The aim of the study was to find the optimum combination of materials and thicknesses to provide a tough, damage resistant multi-layer system with numerical methods to restore the damaged teeth. Extended Finite Element Method (XFEM) was used to assess the critical loads for the onset of damage modes such as radial cracks and plastic deformation in dental prostheses, which consist of a brittle o...

Reliable and quantitative non-destructive evaluation for small fatigue cracks, in particular those in hard-to-inspect locations, is a challenging problem. Guided waves are advantageous for structural health monitoring due to their slow geometrical decay of amplitude with propagating distance, which is ideal for rapid wide-area inspection. This paper presents a 3D laser vibrometry experimental a...